Epoxamite

Epoxy Laminating Resins

Epoxy resins for laminating purposes

Technical bulletin Epoxamite 100

epoxamite slow epoxamite medium epoxamite fast info

epoxamite slow

EpoxAmite™ slow /1,16kg Aushärtezeit: 24H 54,39 EUR

EpoxAmite™ slow /4,6kg Aushärtezeit: 24H 173,83 EUR

Hardener 103 (slow) /250gr 103 SLOW Hardener - Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 0.5 Lbs. 25,33 EUR

Hardener 103 Slow Quart 103 SLOW Härter - Trial Größe TEIL B nur in Kombination mit EpoxAcast verwendet 650: Verhältnis m... 73,33 EUR

epoxamite medium

EpoxAmite™ medium /1,18kg Aushärtezeit:15H 55,03 EUR

EpoxAmite™ medium / 4,6kg Aushärtezeit:15H 173,83 EUR

Hardener 102 (medium) /270gr 102 MEDIUM Hardener - Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours Net Weight : 0.5 Lbs. 26,66 EUR

Hardener102 Medium 1.04 kg 102 MEDIUM Härter - In Verbindung mit EpoxAcast 650: Mischungsverhältnis: 100A: 13B nach Gewicht ... 73,33 EUR

epoxamite fast

EpoxAmite™ fast /1,18kg unit Aushärtezeit:6-8H 52,91 EUR

EpoxAmite™ fast /4,6kg unit Aushärtezeit:6-8H 170,42 EUR

Hardener 101 (fast) /230gr 101 FAST Hardener - Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:12B by weight Pot Life: 20 min. - Cure Time: 1 hour Net Weight : 0.5 Lbs. 24,08 EUR

Hardener 101 Slow Quart This is the Hardner ONLY for the EpoxAmite System - The FAST version. EpoxAmite 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication appl... 71,10 EUR

EpoxAmite® 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite® 100 Laminating System is unfilled, low in viscosity, odorless and cures at room temperature.
Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted. EpoxAmite® 100 Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite® 100 Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil® 3, Urefil® 7 and other fillers can be added for fairing, filleting or bonding applications.

Epoaxamite Dispensing Pump

EpoxAmite® pumps are calibrated to deliver the correct amount of Part A resin and Part B hardener with a single push.

One Push ‘A' + One Push ‘B' = Correct Amount of Product to Mix.

No need to weigh components using a gram scale or measure by volume using graduated cups. Pumps are identified by label on pump head.

Note: These pumps are for EpoxAmite® laminating resins ONLY